Assessment Details Qualification Code/Title Advance Diploma of Computer System Technology Assessment Type Assessment – 3 Time allowed Due Date Location SCCM Term / Year Unit of Competency National Code/Title ICTNWK507- Operate and Troubleshoot Medium Enterprise Routers Student Details Student Name Student ID Student Declaration: I declare that the work submitted is my own, and has not been copied or plagiarised from any person or source. Signature: ____________________________ Date: _____/_/_________ Assessor Details Assessor’s Name RESULTS (Please Circle) ?SATISFACTORY ?NOT SATISFACTORY Feedback to student: *If Student is Not Satisfactory Reassessment Required ? Yes ? No Assessor Declaration: I declare that I have conducted a fair, valid, reliable and flexible assessment with this student, and I have provided appropriate feedback. Signature: ________________________ Date: ______/_______/___________ Comment: Instructions to the Candidates ? This assessment is to be completed according to the instructions given below in this document. ? Should you not answer the tasks correctly, you will be given feedback on the results and gaps in knowledge. You will be entitled to one (1) resubmit in showing your competence with this unit. ? If you are not sure about any aspect of this assessment, please ask for clarification from your assessor. ? Please refer to the College re-submission and re-sit policy for more information. ? If you have questions and other concerns that may affect your performance in the Assessment, please inform the assessor immediately. ? Please read the Tasks carefully then complete all Tasks. ? To be deemed competent for this unit you must achieve a satisfactory result with tasks of this Assessment along with a satisfactory result for another Assessment. ? This is an Open book assessment which you will do in your own time but complete in the time designated by your assessor. Remember, that it must be your own work and if you use other sources then you must reference these appropriately ? Submitted document must follow the given criteria. Font must be Times New Roman, Font size need to be 12, line spacing has to be Single line and Footer of submitted document must include Student ID, Student Name and Page Number. Document must be printed double sided. ? This is Individual Assessments. Once you have completed the assessment, please provide the Hard copy of the Assessments to your Trainer/ Assessor. ? Plagiarism is copying someone else’s work and submitting it as your own. Any Plagiarism will result in a mark of Not Satisfactory. SCCM uses Safe Assign Plagiarism Checker to check the originality of the student assessment. Student must be aware of and understand the SCCM’s policy on plagiarism and certify that this assignment is their own work, except where indicated by referencing, and that student have followed the good academic practices noted above. Assessment Information The assessment tasks for ICTNWK507 Install, Operate and Troubleshoot Medium Enterprise Routers are included in this Student Assessment Tasks booklet and outlined in the assessment plan below. To be assessed as competent for this unit, you must complete all the assessment tasks satisfactorily Assessment Plan Assessment Task Overview 1. Written task Students must correctly answer all questions. 2. Report writing You are required complete the report based on scenario given in Task. 3. Practical/Project You are required complete the practical tasks based on scenario given in Task. Assessment Preparation Please read through this assessment thoroughly before beginning any tasks. Ask your assessor for clarification if you have any questions at all. When you have read, and understood this unit’s assessment tasks, print out the Student Assessment Agreement. Fill it out, sign it, and hand it to your assessor, who will countersign it and then keep it on file. Keep a copy of all your work, as the work submitted to your assessor will not be returned to you. Assessment appeals If you do not agree with an assessment decision, you can make an assessment appeal as per your RTO’s assessment appeals process. You have the right to appeal the outcome of assessment decisions if they feel they have been dealt with unfairly or have other appropriate grounds for an appeal. Naming electronic documents It is important that you name the documents that you create for this Assessment Task in a logical manner. Each should include: • Course identification code • Assessment Task number • Document title (if appropriate) • Student name • Date it was created For example, ICTNWK507 AT3 Support Small Scale Report Joan Smith 20/10/18 Additional Resources You will be provided with the following resources before you begin Assessment Task Assessment Instructions Each assessment task in this booklet consists of the following: Assessment Task Cover Sheet This must be filled out, signed and submitted together with your assessment responses. If you are submitting a hard copy, the Cover Sheet should be the first page of each task’s submission. If you are submitting electronically, print out the cover sheet, fill it out and sign it, then scan this and submit the file. The Assessment Task Cover Sheet will be returned to you with the outcome of the assessment, which will be satisfactory (S) or unsatisfactory (U). If your work has been assessed as being not satisfactory, your assessor will include written feedback in the Assessment Task Cover Sheet giving reasons why. Your assessor will also discuss this verbally with you and provide advice on re-assessment opportunities as per your RTO’s re-assessment policy. Depending on the task, this may include • resubmitting incorrect answers to questions (such as short answer questions and case studies) • resubmitting part or all a project, depending on how the error impacts on the total outcome of the task • redoing a roleplay after being provided with appropriate feedback about your performance • being observed a second (or third time) undertaking any tasks/activities that were not satisfactorily completed the first time, after being provided with appropriate feedback. Assessment Task Information This gives you: • a summary of the assessment task • information on the resources to be used • submission requirements • re-submission opportunities if required Assessment Task Instructions These give questions to answer or tasks which are to be completed. Your answers need to be typed up using the software as indicated in the Assessment Task Instructions. Copy and paste each task’s instructions into a new document and use this as the basis for your assessment task submission. Include this document’s header and footer. If you are submitting electronically, give the document a file name that includes the unit identification number, the task number, your name and the date. Checklist This will be used by your assessor to mark your assessment. Read through this as part of your preparation before beginning the assessment task. It will give you a good idea of what your assessor will be looking for when marking your responses. Assessment 3 Project Work This information is to be handed to each student to outline the assessment requirements Task summary You are required to analyses the scenario of SCCM. Based on the given information you are required to design the proposed IT infrastructure for SCCM. This assessment is to be completed in the simulated work environment in the RTO. There are two part on this assessment Part A, Band Part C, your are required to complete both of task accordingly to satisfy the assessment. Timing Your assessor will advise you of the due date of these submissions. Submit Student must demonstrate the performance in class to their trainer Packet Tracer File Project Document will All Screen Shots of work / performance Project Sign off Sheet Assessment criteria For your performance to be deemed satisfactory in this assessment task, you must satisfactorily address all of the assessment criteria. If part of this task is not satisfactorily completed, you will be asked to complete further assessment to demonstrate competence. Re-submission opportunities You will be provided with feedback on their performance by the Assessor. The feedback will indicate if you have satisfactorily addressed the requirements of each part of this task. If any parts of the task are not satisfactorily completed, the assessor will explain why, and provide you written feedback along with guidance on what you must undertake to demonstrate satisfactory performance. Re-assessment attempt(s) will be arranged later and date. You have the right to appeal the outcome of assessment decisions if you feel that you have been dealt with unfairly or have other appropriate grounds for an appeal. You are encouraged to consult with the assessor prior to attempting this task if you do not understand any part of this task or if you have any learning issues or needs that may hinder you when attempting any part of the assessment. Please read carefully the case study and complete all of the given tasks with appropriate screen shot of all Evidence of the configuration. PART A Case study scenario You are working as a Network Engineer for Nubex Pty Ltd. Company is currently in the process of setting of five global DHCP servers as a part of their company expansion across the Sydney Your main job is to design the network architecture design for all 5 LANs and WAN connection to connect all LAN across the Sydney. You are also asked to design IP address scopes for five global DHCP servers as part of a project to deploy your organisation’s International email system. Since RIP will be the standard routing protocol, zero subnets will be used to conserve IP addresses. You have been told that Nubex Pty Ltd. is going to use private address 10.0.0.0 After discussion with the company’s IT Manager, you have identified the number of nodes needed for each LAN which is tabulated below. Now you need to work out the IP address and subnet mask needed to configure each LAN. You also need to design IP address for serial link to connect various LANs. Location Number of Nodes Townhall (TH) 350 St James (SJ) 190 Oranpark (OP) 55 Burwood (BW) 400 Parramatta (PM) 77 Router links (For serial connection) TH-SJ 2 SJ-OP 2 OP-BW 2 BW-PM 2 PM-TH 2 You must complete all the practical tasks using packet tracer Task 1 What types of routers are needed and how many of them are required according to given specification? Similarly find out how many switches are needed for this complete project and what type of switches will be suitable for each LAN. Outcome ? Satisfactory ? Not Satisfactory Comment Task 2 Establish the sitting and types of terminals, processors and required protocols and architecture based on technical specification and requirements. Outcome ? Satisfactory ? Not Satisfactory Comment Task 3 Set up the layout of the complete network in simulated environment using Packet tracer, visualizer application software Outcome ? Satisfactory ? Not Satisfactory Comment Task 4 Provide details of complete network LAN and WAN diagrams. You need to provide full details of logical and physical topology you going to use, how you going to connect 5 different LAN across Sydney, what transmission media would you will and so on. Outcome ? Satisfactory ? Not Satisfactory Comment Task 5 Design and calculate IP address scopes for seven global DHCP servers as part of a project to deploy your organisation’s International email system Outcome ? Satisfactory ? Not Satisfactory Comment Task 6 Design and calculate IP address for serial and Ethernet interfaces for each router Outcome ? Satisfactory ? Not Satisfactory Comment Task 7 Backup all configuration files in secure place/ FTP Server. Outcome ? Satisfactory ? Not Satisfactory Comment Task 8 Do you need any kind of approval before you access the Nubex network? Create a template of secure sign off to obtain approval for plans, including security and timing. Outcome ? Satisfactory ? Not Satisfactory Comment Task 9 Do can you ensure that there is a minimum disruption when you make changes to the network? Also, show a template of an email which notifies the employees at Nubex that some part of the network may not function during the installation of new device in the network. You need to product LAN and WAN diagram using Packet Tracer and need to submit completed Packet tracer files as the part of the Assessment Outcome ? Satisfactory ? Not Satisfactory Comment PART B Read Care Fully In this task, you need to re-create the network on the packet tracer and configure the router using VLSM dynamic routes. Create your IP addressing scheme and complete the addressing table below. After completing the configuration, test connectivity between the devices on the network. Task 1: Preparing the Network A. Cable the network based on the diagram using Cisco router B. Check and clear the configuration on each router Outcome ? Satisfactory ? Not Satisfactory Comment Task 2: Router Configuration A. Perform the router configuration of Router 1, 2 & 3 • Configure the hostname • Disable DNS lookup • Configure an EXEC mode password • Configure this message-of-the-day banner R1(config)#banner motd& Enter TEXT message. End with the character ‘&’. ******************************** !!!AUTHORIZED ACCESS ONLY!!! ******************************** & R1(config)# • Configure a password for console connections • Configure a password for VTY connections B. Configure and activate serial and Ethernet Address • Configure interface on Router 1, 2 & 3 • Verify IP addressing and interfaces • Configure Ethernet interfaces of PC1, PC2 and PC3 • Test the PC configuration by pinging the default gateway from the PC C. Configure classless routing using routing information protocol (RIP) version 2 (V2) • Enable dynamic routing • Enter classless network addresses • Verify RIPv2 routing and network commands D. Debugging Provide an example of the situation when you should use a debug commands in routers. Provide two commands used for debugging router. List two ports that a router can use to display debug output How do you stop debugging? You need to design fill up table as below. Assessor Checklist and Comment Outcome ? Satisfactory ? Not Satisfactory Comment PART C Read the Following Information Care fully Star Vehicle Workshop is trying to design a network for its various departments using subnets. You need to design and use an IP addressing scheme for the topology shown in the Diagram. The organization has one class C address that you must subnet to provide a logical addressing scheme for the network. Create the following logical diagram in the packet tracer (including cabling, interfaces). Configure each device with the appropriate basic configuration commands. Configure the router’s interface address according to your IP addressing scheme. After completion, use the appropriate commands to verify that the network is working properly The organization recommends to use Classful subnetting. Digram Task 1 : Assess the network requirements. You have been given the 192.168.2.0/26 address space to use in your network design. The network consists of the following segments: • The network connected to router R1 will require enough IP addresses to support 20 hosts. • The network connected to router R2 will require enough IP addresses to support 20 hosts. • The link between router R1 and router R2 will require IP addresses at each end of the link. (Note: Remember that the interfaces of network devices are also host IP addresses and are included in the above addressing scheme.) Outcome ? Satisfactory ? Not Satisfactory Comment Task 2: Consider the following questions when creating your network design. Fill in the blanks. The Subnet mask for this network in dotted decimal format? ____ The subnet mask for the network in slash format? _______ The number of usable hosts are there per subnet? ___ Number of the subnets needed for the organization’s network? ________ Outcome ? Satisfactory ? Not Satisfactory Comment Task 3: Assign subnetwork addresses to the Topology Diagram in Packet Tracer. 1. Assign the first subnet (lowest subnet) to the network attached to R1. 2. Assign the second subnet to the link between R1 and R2. 3. Assign the third subnet to the network attached to R2. Outcome ? Satisfactory ? Not Satisfactory Comment

Assessment Details

Qualification Code/Title Advance Diploma of Computer System Technology

Assessment Type Assessment – 3 Time allowed

Due Date Location SCCM Term / Year

Unit of Competency

National Code/Title ICTNWK507- Operate and Troubleshoot Medium Enterprise Routers

Student Details

Student Name Student ID

Student Declaration: I declare that the work submitted is my own, and has not been copied or plagiarised from any person or source. Signature: ____________________________

Date: _____/_/_________

Assessor Details

Assessor’s Name

RESULTS (Please Circle) ?SATISFACTORY

?NOT SATISFACTORY

Feedback to student:

*If Student is Not Satisfactory

Reassessment Required ? Yes ? No

Assessor Declaration: I declare that I have conducted a fair, valid, reliable and flexible assessment with this student, and I have provided appropriate feedback.

Signature: ________________________

Date: ______/_______/___________

Comment:

Instructions to the Candidates

? This assessment is to be completed according to the instructions given below in this document.

? Should you not answer the tasks correctly, you will be given feedback on the results and gaps in knowledge. You will be entitled to one (1) resubmit in showing your competence with this unit.

? If you are not sure about any aspect of this assessment, please ask for clarification from your assessor.

? Please refer to the College re-submission and re-sit policy for more information.

? If you have questions and other concerns that may affect your performance in the Assessment, please inform the assessor immediately.

? Please read the Tasks carefully then complete all Tasks.

? To be deemed competent for this unit you must achieve a satisfactory result with tasks of this Assessment along with a satisfactory result for another Assessment.

? This is an Open book assessment which you will do in your own time but complete in the time designated by your assessor. Remember, that it must be your own work and if you use other sources then you must reference these appropriately

? Submitted document must follow the given criteria. Font must be Times New Roman, Font size need to be 12, line spacing has to be Single line and Footer of submitted document must include Student ID, Student Name and Page Number. Document must be printed double sided.

? This is Individual Assessments. Once you have completed the assessment, please provide the Hard copy of the Assessments to your Trainer/ Assessor.

? Plagiarism is copying someone else’s work and submitting it as your own. Any Plagiarism will result in a mark of Not Satisfactory. SCCM uses Safe Assign Plagiarism Checker to check the originality of the student assessment. Student must be aware of and understand the SCCM’s policy on plagiarism and certify that this assignment is their own work, except where indicated by referencing, and that student have followed the good academic practices noted above.

Assessment Information

The assessment tasks for ICTNWK507 Install, Operate and Troubleshoot Medium Enterprise Routers are included in this Student Assessment Tasks booklet and outlined in the assessment plan below.

To be assessed as competent for this unit, you must complete all the assessment tasks satisfactorily

Assessment Plan

Assessment Task Overview

1. Written task Students must correctly answer all questions.

2. Report writing You are required complete the report based on scenario given in Task.

3. Practical/Project You are required complete the practical tasks based on scenario given in Task.

Assessment Preparation

Please read through this assessment thoroughly before beginning any tasks. Ask your assessor for clarification if you have any questions at all.

When you have read, and understood this unit’s assessment tasks, print out the Student Assessment Agreement. Fill it out, sign it, and hand it to your assessor, who will countersign it and then keep it on file. Keep a copy of all your work, as the work submitted to your assessor will not be returned to you.

Assessment appeals

If you do not agree with an assessment decision, you can make an assessment appeal as per your RTO’s assessment appeals process.

You have the right to appeal the outcome of assessment decisions if they feel they have been dealt with unfairly or have other appropriate grounds for an appeal.

Naming electronic documents

It is important that you name the documents that you create for this Assessment Task in a logical manner.

Each should include:

• Course identification code

• Assessment Task number

• Document title (if appropriate)

• Student name

• Date it was created

For example, ICTNWK507 AT3 Support Small Scale Report Joan Smith 20/10/18

Additional Resources

You will be provided with the following resources before you begin Assessment Task

Assessment Instructions

Each assessment task in this booklet consists of the following:

Assessment Task Cover Sheet

This must be filled out, signed and submitted together with your assessment responses.

If you are submitting a hard copy, the Cover Sheet should be the first page of each task’s submission.

If you are submitting electronically, print out the cover sheet, fill it out and sign it, then scan this and submit the file.

The Assessment Task Cover Sheet will be returned to you with the outcome of the assessment, which will be satisfactory (S) or unsatisfactory (U). If your work has been assessed as being not satisfactory, your assessor will include written feedback in the Assessment Task Cover Sheet giving reasons why. Your assessor will also discuss this verbally with you and provide advice on re-assessment opportunities as per

your RTO’s re-assessment policy.

Depending on the task, this may include

• resubmitting incorrect answers to questions (such as short answer questions and case studies)

• resubmitting part or all a project, depending on how the error impacts on the total outcome of the task

• redoing a roleplay after being provided with appropriate feedback about your performance

• being observed a second (or third time) undertaking any tasks/activities that were not satisfactorily completed the first time, after being provided with appropriate feedback.

Assessment Task Information

This gives you:

• a summary of the assessment task

• information on the resources to be used

• submission requirements

• re-submission opportunities if required

Assessment Task Instructions

These give questions to answer or tasks which are to be completed.

Your answers need to be typed up using the software as indicated in the Assessment Task Instructions.

Copy and paste each task’s instructions into a new document and use this as the basis for your assessment task submission. Include this document’s header and footer.

If you are submitting electronically, give the document a file name that includes the unit identification number, the task number, your name and the date.

Checklist

This will be used by your assessor to mark your assessment. Read through this as part of your preparation before beginning the assessment task. It will give you a good idea of what your assessor will be looking for when marking your responses.

Assessment 3 Project Work

This information is to be handed to each student to outline the assessment requirements

Task summary

You are required to analyses the scenario of SCCM. Based on the given information you are required to design the proposed IT infrastructure for SCCM.

This assessment is to be completed in the simulated work environment in the RTO. There are two part on this assessment Part A, Band Part C, your are required to complete both of task accordingly to satisfy the assessment.

Timing

Your assessor will advise you of the due date of these submissions.

Submit

Student must demonstrate the performance in class to their trainer

Packet Tracer File

Project Document will All Screen Shots of work / performance

Project Sign off Sheet Assessment criteria

For your performance to be deemed satisfactory in this assessment task, you must satisfactorily address all of the assessment criteria. If part of this task is not satisfactorily completed, you will be asked to complete further assessment to demonstrate competence.

Re-submission opportunities

You will be provided with feedback on their performance by the Assessor. The feedback will indicate if you have satisfactorily addressed the requirements of each part of this task.

If any parts of the task are not satisfactorily completed, the assessor will explain why, and provide you written feedback along with guidance on what you must undertake to demonstrate satisfactory performance. Re-assessment attempt(s) will be arranged later and date.

You have the right to appeal the outcome of assessment decisions if you feel that you have been dealt with unfairly or have other appropriate grounds for an appeal.

You are encouraged to consult with the assessor prior to attempting this task if you do not understand any part of this task or if you have any learning issues or needs that may hinder you when attempting any part of the assessment.

Please read carefully the case study and complete all of the given tasks with appropriate screen shot of all Evidence of the configuration.

PART A

Case study scenario

You are working as a Network Engineer for Nubex Pty Ltd. Company is currently in the process of setting of five global DHCP servers as a part of their company expansion across the Sydney

Your main job is to design the network architecture design for all 5 LANs and WAN connection to connect all LAN across the Sydney. You are also asked to design IP address scopes for five global DHCP servers as part of a project to deploy your organisation’s International email system. Since RIP will be the standard routing protocol, zero subnets will be used to conserve IP addresses. You have been told that Nubex Pty Ltd. is going to use private address 10.0.0.0

After discussion with the company’s IT Manager, you have identified the number of nodes needed for each LAN which is tabulated below. Now you need to work out the IP address and subnet mask needed to configure each LAN. You also need to design IP address for serial link to connect various LANs.

Location Number of Nodes

Townhall (TH) 350

St James (SJ) 190

Oranpark (OP) 55

Burwood (BW) 400

Parramatta (PM) 77

Router links (For serial connection)

TH-SJ 2

SJ-OP 2

OP-BW 2

BW-PM 2

PM-TH 2

You must complete all the practical tasks using packet tracer

Task 1

What types of routers are needed and how many of them are required according to given specification? Similarly find out how many switches are needed for this complete project and what type of switches will be suitable for each LAN.

Outcome ? Satisfactory

? Not Satisfactory

Comment

Task 2

Establish the sitting and types of terminals, processors and required protocols and architecture based on technical specification and requirements.

Outcome ? Satisfactory

? Not Satisfactory

Comment

Task 3

Set up the layout of the complete network in simulated environment using Packet tracer, visualizer application software

Outcome ? Satisfactory

? Not Satisfactory

Comment

Task 4

Provide details of complete network LAN and WAN diagrams. You need to provide full details of logical and physical topology you going to use, how you going to connect 5 different LAN across Sydney, what transmission media would you will and so on.

Outcome ? Satisfactory

? Not Satisfactory

Comment

Task 5

Design and calculate IP address scopes for seven global DHCP servers as part of a project to deploy your organisation’s International email system

Outcome ? Satisfactory

? Not Satisfactory

Comment

Task 6

Design and calculate IP address for serial and Ethernet interfaces for each router

Outcome ? Satisfactory

? Not Satisfactory

Comment

Task 7

Backup all configuration files in secure place/ FTP Server.

Outcome ? Satisfactory

? Not Satisfactory

Comment

Task 8

Do you need any kind of approval before you access the Nubex network? Create a template of secure sign off to obtain approval for plans, including security and timing.

Outcome ? Satisfactory

? Not Satisfactory

Comment

Task 9

Do can you ensure that there is a minimum disruption when you make changes to the network? Also, show a template of an email which notifies the employees at Nubex that some part of the network may not function during the installation of new device in the network.

You need to product LAN and WAN diagram using Packet Tracer and need to submit completed Packet tracer files as the part of the Assessment

Outcome ? Satisfactory

? Not Satisfactory

Comment

PART B

Read Care Fully

In this task, you need to re-create the network on the packet tracer and configure the router using VLSM dynamic routes. Create your IP addressing scheme and complete the addressing table below. After completing the configuration, test connectivity between the devices on the network.

Task 1: Preparing the Network

A. Cable the network based on the diagram using Cisco router

B. Check and clear the configuration on each router

Outcome ? Satisfactory

? Not Satisfactory

Comment

Task 2: Router Configuration

A. Perform the router configuration of Router 1, 2 & 3

• Configure the hostname

• Disable DNS lookup

• Configure an EXEC mode password

• Configure this message-of-the-day banner

R1(config)#banner motd&

Enter TEXT message. End with the character ‘&’.

********************************

!!!AUTHORIZED ACCESS ONLY!!!

********************************

&

R1(config)#

• Configure a password for console connections

• Configure a password for VTY connections

B. Configure and activate serial and Ethernet Address

• Configure interface on Router 1, 2 & 3

• Verify IP addressing and interfaces

• Configure Ethernet interfaces of PC1, PC2 and PC3

• Test the PC configuration by pinging the default gateway from the PC

C. Configure classless routing using routing information protocol (RIP) version 2 (V2)

• Enable dynamic routing

• Enter classless network addresses

• Verify RIPv2 routing and network commands

D. Debugging

Provide an example of the situation when you should use a debug commands in routers.

Provide two commands used for debugging router.

List two ports that a router can use to display debug output

How do you stop debugging?

You need to design fill up table as below.

Assessor Checklist and Comment

Outcome ? Satisfactory

? Not Satisfactory

Comment

PART C

Read the Following Information Care fully

Star Vehicle Workshop is trying to design a network for its various departments using subnets. You need to design and use an IP addressing scheme for the topology shown in the Diagram. The organization has one class C address that you must subnet to provide a logical addressing scheme for the network.

Create the following logical diagram in the packet tracer (including cabling, interfaces). Configure each device with the appropriate basic configuration commands.

Configure the router’s interface address according to your IP addressing scheme. After completion, use the appropriate commands to verify that the network is working properly

The organization recommends to use Classful subnetting.

Digram

Task 1 : Assess the network requirements.

You have been given the 192.168.2.0/26 address space to use in your network design.

The network consists of the following segments:

• The network connected to router R1 will require enough IP addresses to support 20 hosts.

• The network connected to router R2 will require enough IP addresses to support 20 hosts.

• The link between router R1 and router R2 will require IP addresses at each end of the link.

(Note: Remember that the interfaces of network devices are also host IP addresses and are included in the above addressing scheme.)

Outcome ? Satisfactory

? Not Satisfactory

Comment

Task 2: Consider the following questions when creating your network design. Fill in the blanks.

The Subnet mask for this network in dotted decimal format? ____

The subnet mask for the network in slash format? _______

The number of usable hosts are there per subnet? ___

Number of the subnets needed for the organization’s network? ________

Outcome ? Satisfactory

? Not Satisfactory

Comment

Task 3: Assign subnetwork addresses to the Topology Diagram in Packet Tracer.

1. Assign the first subnet (lowest subnet) to the network attached to R1.

2. Assign the second subnet to the link between R1 and R2.

3. Assign the third subnet to the network attached to R2.

Outcome ? Satisfactory

? Not Satisfactory

Comment